AC110V 220V high voltage LED strip for subway tunnel bridge underground mine road Drum Working Light Construction Site Outdoor Use Waterproof
Type | Model | Size | LED | LED qty | CCT | Ra | Cutting | Lumen/LED | PCB width | Input voltage | Power | Lumen/m | Warranty | Packing | GW.: |
High Volt | CML2835-144-110V | 7*15MM | SMD 2835 | 144PCS/M | 3000K | Ra≥80 | 1M | 24~26LM | 10mm | AC120/ AC230 | 7W/M | 800LM | 3years | 50m/reel/ctn | 9Kgs |
High Volt | CML2835-144-110V | 7*15MM | SMD 2835 | 144PCS/M | 4000K | Ra≥80 | 1M | 24~26LM | 10mm | AC120/ AC230 | 7W/M | 800LM | 3years | 50m/reel/ctn | 9Kgs |
High Volt | CML2835-144-110V | 7*15MM | SMD 2835 | 144PCS/M | 6000K | Ra≥80 | 1M | 24~26LM | 10mm | AC120/ AC230 | 7W/M | 800LM | 3years | 50m/reel/ctn | 9Kgs |
High Volt | CML2835-240-110V | 7*15MM | SMD 2835 | 240PCS/M | 3000K | Ra≥80 | 1M | 24~26LM | 10mm | AC120/ AC230 | 9W/M | 1000LM | 3years | 50m/reel/ctn | 9.2Kgs |
High Volt | CML2835-240-110V | 7*15MM | SMD 2835 | 240PCS/M | 4000K | Ra≥80 | 1M | 24~26LM | 10mm | AC120/ AC230 | 9W/M | 1000LM | 3years | 50m/reel/ctn | 9.2Kgs |
High Volt | CML2835-240-110V | 7*15MM | SMD 2835 | 240PCS/M | 6000K | Ra≥80 | 1M | 24~26LM | 10mm | AC120/ AC230 | 9W/M | 1000LM | 3years | 50m/reel/ctn | 9.2Kgs |
CROSS -SECTION
CONNECTING
SPECTRAL ANALYSIS
PACKING
CAUTIONS:
1. Each roll of LED strip light take the rectifier bridge stack and AC plug which can connect the utility power directly. DO NOT overload. The circuit has a circuit protector to ensure its working voltage ranges ±5% of its rated parameter.
2. If you need to customize the length, it should be cut at the clipping position marked on the strip body which usually is 1 meter per cutting. Please take the end cap with silicone glue at the cutting position to get waterproof performance.
3. Do not twist the strip light sharply and continuously in which case may cause fatigue damage to the PCB . The twisting angle should not be above 45 degrees, and do not bend the strip light in an arc less than 60mm in diameter.
4. Please install the product in places with good ventilation conditions. DO NOT light up the whole roll untill spread out the lights, to get better heat dissipation .
5. In order to ensure the life span of the strip light, DO NOT pull, crash and squeeze the strip light sharply during installation. The installation and fixing must be firm, without flapping or swinging.
6. Part of this product is waterproof of IP65, and the connector part is only for pre-fixing and protecting against electric shock when shipped from the factory; When used outdoors, the joint must be placed in an environment without water or sealed by professional electricians to ensure that the joint position will be waterproof
1. Get passed CE/ROHS certification
2, Low temperature resistance -25℃, high temperature resistance +80℃
3, UV resistance, flame retardant grade V1-V0
4, Integrated housing molding, waterproof IP65, available for indoor &outdoor
5, High luminous efficiency, high brightness, good subsidiary lighting for site
6, Portable reel design, convenient movement and installation
7, No external power adapter, direct AC110V/220V connecting wire, long distance running , suitable for subway, tunnel, mine, bridge ,underground mine road and other applications
Welcome to consult DELIKAY AC110V 220V high voltage LED strip for subway tunnel bridge underground mine road !
OEM customized service &Turn-key solution available!